USB Console Port Wiring
The managed switches also have an USB port alternative to the RS232 port. Use a standard
USB cable with a mini-USB plug on one end and an A-type-USB plug on the other end. The
A-type plug goes into a standard USB port on a computer. The mini-USB plug goes into the
USB port on the switch.
The USB driver is available for download at automationdirect.com.
NOTE: The RS-232 and/or USB ports may be located on the bottom edge or front face of the switch.
1-30
Chapter 1 - Hardware
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
RS232
RJ45F
Mini-USB
RS232
RJ45F
Mini-USB
To Next Page
Loading...