To change a preparation method, see Changing a preparation method ►34
Storing capacity
You can store a maximum of 200 methods in up to 10 groups. Each group can contain up to 20
methods.
6.4.1 Creating a preparation method
You can create an entire preparation method step by step.
1. From the Main menu screen, select Automatic preparation or Manual
preparation.
2. Select New group > New method.
3. In the New method - Step No. 1 screen, change the settings needed for the
preparation method.
An asterisk (*) next to the name of the preparation method name indicates that
there are unsaved changes.
4. When you have changed the required settings, press F3.
New method - Step No. 2 is shown.
5. When you have created and changed the required preparation steps, save the
preparation method:
6. Press F4.
– Save method
Save the method with the current name and current method group.
– Save method as
Specify a new method group and a new method name.
6.4.2 Settings
You can change the settings for each step in a preparation method.
Setting
Surface type/Surface
• Select surface type and surface.
Suspension type/Suspension
• Select the suspension.
Lubricant
• Select the lubricant.
All-in-one suspensions are set up as lubricants.
32 AbraPol-30
6 Operating the device
To Next Page