Struers AbraPol-30 - Weekly Maintenance; Cleaning the Bowl; Cleaning the Tubes

7.3 Weekly
Clean the machine regularly to avoid damage caused by abrasive grains or metal particles.
1. Clean all painted surfaces and the control panel with a soft damp cloth and common
household detergents. For heavy duty cleaning, use a heavy duty cleaning agent such as
Solopol Classic.
2. Cleaning the surfaceClean the cover with a soft damp cloth and a common household anti-
static window cleaner.
Note
Make sure that no detergent or cleaning agent is flushed into the cooling unit tank,
as this will cause excess foaming.
Recirculation unit
See the manual supplied with the specific equipment.
• Clean the recirculation unit.
• Clean the recirculation unit tank.
• Fill up the recirculation unit tank.
7.3.1 Cleaning the bowl
To clean the bowl, use the bowl cleaning function.
1. From the Maintenance menu select Cleaning of bowl.
2. Select the cleaning time.
3. If needed, select disc rotation.
4. If needed, select additional cleaning water.
5. Press F1 to start the cleaning process.
Note
The additional water for cleaning comes from the dosing arm.
7.3.2 Cleaning the tubes
Clean the tubes every week or every time you change or replace the bottles. This will prevent
lubricant/suspension left in the tubes from affecting the preparation procedures.
• From the Maintenance menu select Cleaning of tubes.
7 Maintenance and service - AbraPol-30
AbraPol-30 41