Required
Struers recommends adding a Struers anti-corrosion additive to the cooling water.
The use of Struers consumables is recommended.
Other products may contain aggressive solvents, which dissolve e.g. rubber seals. The warranty
may not cover damaged machine parts (e.g. seals and tubes), where the damage can be directly
related to the use of consumables not supplied by Struers.
11 Manufacturer
Struers ApS
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Telephone: +45 44 600 800
Fax: +45 44 600 801
www.struers.com
Responsibility of the manufacturer
The following restrictions should be observed, as violation of the restrictions may cause
cancellation of Struers legal obligations.
The manufacturer assumes no responsibility for errors in the text and/or illustrations in this
manual. The information in this manual is subject to change without notice. The manual may
mention accessories or parts not included in the supplied version of the equipment.
The manufacturer is to be considered responsible for effects on safety, reliability, and
performance of the equipment only if the equipment is used, serviced, and maintained in
accordance with the instructions for use.
11 Manufacturer
AbraPol-30 75
To Next Page