Stryker Sidne - Voice Commands Menu

Operating the ESU
105 EN
Voice Commands Menu
Table 2 shows the Sidne™ voice commands for controlling the ESU.
Each voice command is listed with a description of its function.
Voice Commands
Top
Level
Device Control Selection Description
SIDNE™ ESU
Bipolar
Power Down
*
* Sidne™ will respond to these commands with or without the word
“Power” (i.e., “Power Up” or “Up”; “Power Down” or “Down”).
Decreases the Bipolar power level by
one setting.
**
** For more information on power level settings, refer to the Valleylab
Force FX™ Electrosurgical Unit Manual.
Power Up* Increases the Bipolar power level by
one setting.**
Standard Sets Bipolar function to Standard
mode.
Precise Sets Bipolar function to Precise mode.
Macro Sets Bipolar function to Macro mode.
Coag
Power Down* Decreases the Coag power level by
one setting.**
Power Up* Increases the Coag power level by
one setting.**
Desiccate Sets Coag function to Desiccate
mode.
Fulgurate Sets Coag function to Fulgurate mode
Spray Sets Coag function to Spray mode
Cut
Power Down* Decreases the Cut power level by one
setting.**
Power Up* Increases the Cut power level by one
setting.**
Blend Sets Cut function to Blend mode
Pure Sets Cut function to Pure mode
Low Sets Cut function to Low mode