Stryker Sidne - The Microphone Headset

14 EN
Caution Do not open the battery compartment or try to replace the
batteries as battery function may be compromised. Contact
your local Stryker representative for assistance.
The Microphone Headset
The microphone headset provides voice-activated control of the Sidne™
system and any devices connected to the console. When a command is
spoken into the microphone headset, the headset transmits the command
via radio frequency to the Sidne™ console, where it is then routed to the
appropriate device.
The headset comprises three main components, which are described in
Figures 5 through 8 below:
1. The headset (Figure 5)
2. The transmitter (Figure 6)
3. The receiver (front panel Figure 7; rear panel Figure 8).
Figure 5: The headset
1. Headpiece: Fits over the top of the head or above the ear and
behind the head, positioning the microphone in front of the
mouth.
2. Microphone Mouthpiece: Fits three fingers’ breadth away from
the corner of the mouth to receive spoken commands.
3. Headpiece Connector: Connects to the transmitter.
3
2
1