BELT COVER
MECHANICAL
14.Belt
Cover
C: INSPECTION
A:
REMOVAL
1)
Remove the V-belt. <Ref. to ME(D0HC TUR-
BO)-44, REMOVAL, V-belt.>
2) Remove the crankshaft pulley. <Ref.
to
ME(D0HC TURBO)-46, REMOVAL, Crankshaft
Pulley.
>
3)
Remove the left-hand belt cover (A).
4) Remove the right-hand belt cover
(B).
5)
Remove the front belt cover (C).
Make sure the cover
is
not damaged.
B: INSTALLATION
1)
Install the front belt cover (C).
Tightening torque:
5
N-m
(0.5
kgf-m, 3.6
ff-lb)
2)
Install the right-hand belt cover (B).
Tightening torque:
3)
Install the left-hand belt cover (A).
Tightening torque:
5
N.m
(0.5
kgf-m, 3.6
ff-lb)
5
N-m
(0.5
kgf-m, 3.6 ff-lb)
4) Install the crankshaft pulley. <Ref.
to
ME(D0HC
TURBO)-46, INSTALLATION, Crankshaft Pulley.>
5)
Install the V-belt. <Ref.
to
ME(D0HC TURBO)-
44,
I
N STALLATI
ON,
V- belt.
>
ME(D0HC TURBO)-47
To Next Page
Loading...
