FRONT OXYGEN
(NF)
SENSOR
FUEL INJECTION
(FUEL
SYSTEMS)
15.Front Oxygen
(NF)
Sensor
A:
REMOVAL
1)
Disconnect the battery ground cable.
2)
Remove the solenoid valve cover
3)
Disconnect the connector from the front oxygen
(NF)
sensor.
4) Disconnect the engine harness fixed by clip (A)
from the bracket (6).
6)
Lift-up the vehicle.
7)
Remove the service hole cover
I1
EN0832
8)
Apply SUBARU
CRC
or its equivalent to the
threaded portion of front oxygen
(NF)
sensor, and
leave it for one minute or more.
SUBARU CRC (Part
No.
004301003)
9)
Remove the front oxygen
(NF)
sensor.
CAUTION:
When removing the oxygen
(NF)
sensor, wait
until exhaust pipe
cools, otherwise it will dam-
age exhaust pipe.
5)
Remove the front right side wheel.
FU(D0HC TURBO)-42
To Next Page
Loading...
Need help?
General
