MUFFLER
EXHAUST
6.
Muffler
A:
REMOVAL
1)
Separate the muffler from rear exhaust pipe.
CAUTION:
Be careful, the exhaust pipe is hot.
2)
Remove the rubber cushions, and detach muf-
fler.
CAUTION:
Be careful not to drop the muffler during remov-
al.
NOTE:
To facilitate removal, apply a coat of SUBARU
CRC to the mating area of rubber cushions in ad-
vance.
SUBA
RU CRC
(Part
No. 00430 1003)
II
EN089
B: INSTALLATION
1)
Install in the reverse order of removal.
CAUTION:
Replace the gasket with a new one.
Tightening torque:
48
N.m (4.9 kgf-m, 35.4
ft-lb)
C: INSPECTION
1)
Make sure there are no exhaust leaks from con-
nections and welds.
2)
Make sure there are no holes or rusting.
3)
Make sure the cushion rubber is not worn or
cracked.
EX(D0HC TURBO)-14
To Next Page
Loading...
