Subaru 2002 Impreza - Camshaft Position Sensor

CAMSHAFT POSITION SENSOR
FUEL INJECTION (FUEL SYSTEMS)
6. Camshaft Position Sensor B: INSTALLATION
A: REMOVAL
1) Disconnect the battery ground cable.
Install in the reverse order of removal.
Tightening torque:
T: 6.4 Nom (0.65 kgf-m, 4.7
ft-lb)
sition sensor.
2) Disconnect the connector from the camshaft po-
3) Remove the hcamshaft position sensor from the
camshaft support
LH
\\ 1 IG2M0417
FU(D0HC TURBO)-31