FUEL LEVEL SENSOR
FUEL INJECTION (FUEL SYSTEMS)
26.Fuel
Level
Sensor
A:
REMOVAL
WARNING:
Place
“NO
FIRE”
signs near the working area.
Be careful not to spill fuel
on
the floor.
NOTE:
Fuel level sensor is built in fuel pump assembly.
1)
Remove the fuel pump assembly. <Ref. to
FU(D0HC
TURBO)-60,
REMOVAL,
Fuel Pump.>
2)
Disconnect the connector from the fuel pump
bracket.
3)
Remove the bolt which installs the fuel level sen-
sor on mounting bracket.
B: INSTALLATION
Install in the reverse order
of
removal.
FU(D0HC
TURBO)-62
To Next Page
Loading...
