Subaru 2002 Impreza - Engine Coolant Temperature Sensor

ENGINE COOLANT TEMPERATURE SENSOR
FUEL INJECTION (FUEL SYSTEMS)
4. Engine Coolant Temperature
B: INSTALLATION
Sensor
A: REMOVAL
1) Disconnect the battery ground cable.
2) Remove the generator <Ref. to SC-13, REMOV-
AL, Generator.>
3) Disconnect the connector from the engine cool-
ant temperature sensor.
4) Remove the engine coolant temperature sensor.
Install in the reverse order of removal.
Tigh fening torque:
18 N.m (1.8 kgf-m, 13.3 fi-lb)
FU(D0HC TURBO)-29