I
CAMSHAFT
MECHANICAL
18.Camshaft
A:
REMOVAL
I)
Remove the V-belt. <Ref. to ME(D0HC
TUR-
BO)-44, INSTALLATION, V-belt.>
2) Remove the crankshaft pulley. <Ref. to
ME(D0HC TURBO)-46, REMOVAL, Crankshaft
Pulley.
>
3)
Remove the belt cover. <Ref. to ME(D0HC
TURBO)-47, REMOVAL, Belt Cover.>
4) Remove the timing belt assembly. <Ref. to
ME(D0HC TURBO)-48, REMOVAL, Timing Belt
Assembly.>
5)
Remove the camshaft sprocket. <Ref. to
ME(D0HC TURBO)-57, REMOVAL, Camshaft
Sprocket.>
6) Remove the crankshaft sprocket. <Ref. to
ME(D0HC TURBO)-58, REMOVAL, Crankshaft
Sprocket.
>
7) Remove the right-hand belt cover No.2.
8) Remove the tensioner bracket.
9)
Remove the left-hand belt cover No. 2.
S2M1162
10)
Remove the oil level gauge guide.
(LH
side
11) Remove the spark plug cord.
12) Remove the rocker cover and gasket.
13)
Loosen the intake camshaft cap bolts equally, a
little at a time in alphabetical sequence shown in
the figure.
only)
L
S2M1233A
U
U
14) Remove the camshaft caps and intake cam-
shaft.
15) Loosen the exhaust camshaft cap bolts equally,
a little at a time in alphabetical sequence shown in
the figure.
16) Remove the camshaft caps and exhaust cam-
shaft.
CAUTION:
Arrange camshaft caps in order
so
that they
can be installed in their original positions.
17) Similarly, remove the right-hand camshafts and
related parts.
ME( DOHC TU RBO)-59
To Next Page
Loading...
