Subaru 2002 Impreza - Mass Air Flow and Intake Air Temperature Sensor

MASS AIR FLOW AND INTAKE AIR TEMPERATURE SENSOR
FUEL INJECTION (FUEL SYSTEMS)
9. Mass Air Flow and Intake Air B: INSTALLATION
Temperature Sensor
A: REMOVAL
1) Disconnect the battery ground cable.
Install in the reverse order of removal.
Tightening torque:
7.5 N-m (0.76 kgf-m, 5.5 ft-lb)
2) Disconnect the connector mass air flow and in-
take air temperature sensor.
3) Remove the mass air flow and intake air temper-
ature sensor.
FU(D0HC TURBO)-34