READ DIAGNOSTIC TROUBLE CODE
I
EN
G
I
N
E
(DIAGNOSTICS)
11
.Read
Diagnostic
Trouble
Code
A:
OPERATION
1.
SUBARU SELECT MONITOR (NORMAL
MODE)
1)
On the ((Main Menu,, display screen, select the
{Each System Check} and press the [YES] key.
2)
On the <<System Selection Menu)) display
screen, select the {Engine Control System} and
press the [YES] key.
3)
Press the [YES] key after displayed the informa-
tion of engine type.
4)
On the <<Engine Diagnosis,) display screen, se-
lect the {Diagnostic Code@) Display} and press the
[YES] key.
5)
On the <<Diagnostic Code(s) Display)) display
screen, select the {Current Diagnostic Code(s)} or
{History Diagnostic Code@)} and press the [YES]
key.
NOTE:
For detailed operation procedure, refer
to
the
UAL.
For detailed concerning diagnostic trouble
codes, refer
to
the List of Diagnostic Trouble Code
(DTC). <Ref.
to
EN(D0HC TURBO)-80, List of Di-
agnostic Trouble Code (DTC).>
2.
SUBARU SELECT MONITOR (OBD
MODE)
1)
On the <<Main Menu)) display screen, select the
(2.
Each System Check} and press the [YES] key.
2)
On the <<System Selection Menu,, display
screen, select the {Engine Control System} and
press the [YES] key.
3)
Press the [YES] key after displayed the informa-
tion of engine type.
4)
On the <<Engine Diagnosis,, display screen, se-
lect the {OBD System} and press the [YES] key.
5)
On the <<OBD Menu)) display screen, select the
{Diagnosis Code(s) Display} and press the [YES]
key.
6)
Make
sure
that a diagnostic trouble code (DTC)
is shown on the display screen.
NOTE:
For detailed operation procedure, refer
to
the
UAL.
For detailed concerning diagnostic trouble
codes, refer
to
the List
of
Diagnostic Trouble Code
(DTC). <Ref.
to
EN(D0HC TURBO)-80, List of Di-
agnostic Trouble Code (DTC).>
SUBARU SELECT MONITOR OPERATION MAN-
SUBARU SELECT MONITOR OPERATION MAN-
3.
OBD-ll GENERAL SCAN TOOL
Refers
to
data denoting emission-related power-
train diagnostic trouble codes.
For details concerning diagnostic trouble codes, re-
fer
to
the List of Diagnostic Trouble Code (DTC).
<Ref.
to
EN(D0HC TURBO)-80, List of Diagnostic
Trouble Code (DTC).>
NOTE:
Refer
to
OBD-II general scan tool manufacturer's
instruction manual
to
access emission-related
powertrain diagnostic trouble codes (MODE
$03).
EN(D0HC TURBO)-45
To Next Page
Loading...
