FRONT EXHAUST
PIPE
lls
EXHAUST
5)
Connect the exhaust manifold (RH) to turbo-
charger joint pipe.
Tightening torque:
35
N-m
(3.6
kgf-m,
26.0
ft-lb)
6)
Install the upper and lower exhaust manifold
covers (LH).
Tightening torque:
7)
Install the lower exhaust manifold cover (RH).
Tightening torque:
79
N-m
(7.9 kgf-m, 73.7
ff-lb)
79
N*m
(7.9 kgf-m, 73.7 ft-lb)
8)
Install the front oxygen
(NF)
sensor. <Ref. to
FU(D0HC TURBO)-43, INSTALLATION, Front
Oxygen
(NF)
Sensor.>
9)
Install the under cover.
10) Connect the battery ground terminal to battery.
5
EX(D0HC TURBO)-7
To Next Page
Loading...
