SunFounder ESP32 Starter Kit
2. Open the code.
• Open the 7.3_bluetooth_audio_player.ino file under the path of
esp32-starter-kit-main\c\codes\7.3_bluetooth_audio_player.
• After selecting the board (ESP32 Dev Module) and the appropriate port, click the Upload button.
• Always displaying “Unknown COMxx”?
• The ESP32-A2DP library is used here, refer to Manual Installation for a tutorial to install.
3. After selecting the correct board and port, click on the Upload button.
4. Once the code is uploaded successfully, turn on the Bluetooth-enabled device and search for available devices,
then connect to the ESP32_Bluetooth.
1.40. 7.3 Bluetooth Audio Player 149
To Next Page
Loading...