EasyManua.ls Logo

Sungrow SH10RT - Page 155

Sungrow SH10RT
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
143
Parameters SH5.0RT SH6.0RT
Max. AC output current 7.6 A
9.1 A
Rated AC voltage 3 / N / PE, 220 / 380 V; 230 / 400 V; 240 / 415 V
AC voltage range 270 - 480 Vac
Rated grid frequency/Grid
frequency range
50Hz / 45 - 55Hz, 60Hz / 55 - 65Hz
THD
< 3 % (of rated power)
DC current injection < 0.5 % In
Power factor
> 0.99 / 0.8 leading to 0.8 lagging
Protection&Function
LVRT Yes
Anti-islanding protection Yes
AC short circuit protection Yes
Leakage current protection Yes
DC switch (solar) Yes
DC Overcurrent Protection
(battery)
Yes
Over-voltage category III [Mains], II [PV] [Battery]
SPD DC Type II / AC Type II
Battery input reverse polarity
protection
Yes
Parallel operation on grid port
/ Max. No. of inverters
Master-slave mode / 5 ** (need same inverters type)
System Data
Max. efficiency
98.0 % 98.2 %
European efficiency
97.2 % 97.5 %
Isolation method (solar /
battery)
Transformerless / Transformerless
Degree of protection IP65
Operating ambient tempera-
ture range
-25 - 60
Allowable relative humidity
range (Non-condensing)
0 - 100 %
Cooling method Natural convection
Max. operating altitude 4000 m (> 3000 m derating)
Noise (Typical) 30 dB(A)
Display LED
Communication
RS485, WLAN, Ethernet, CAN, 4 × DI, 1 × DO
User Manual 11 Appendix

Table of Contents

Other manuals for Sungrow SH10RT

Related product manuals