EasyManua.ls Logo

Sungrow SH10RT - Page 156

Sungrow SH10RT
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
144
Parameters SH5.0RT SH6.0RT
DC connection type MC4 (PV) / Sunclix (Battery)/Evo2 Compatible (Battery)
AC connection type Plug and play connector
Country of manufacture China
Mechanical Data
Dimensions (W x H x D) 460 mm x 540 mm x 170 mm
Mounting method Wall-mounting bracket
Weight 27 kg
Backup Data
Rated voltage 3 / N / PE, 220 Vac / 230 Vac / 240 Vac
Frequency range 50 Hz / 60 Hz
Total hamonic factor output
voltage(Linear load)
2%
Switch time to emergency
mode
< 20 ms
Rated output power
5000 W / 5000 VA 6000 W / 6000 VA
Peak output power ***
6000 W / 6000 VA5min
10000 W / 10000 VA10 s
7200 W / 7200 VA,5min
10000 W / 10000 VA,10 s
Peak output power on single
phase ****
2000 VA (≥9.6kWh) 2200 VA (≥128kWh)
Rated output current for
backup load during on grid
mode
3 x 18.5 A
* Depending on the connected battery.
** Germany is available for 2 inverters parallel in maximum if no ripple control is used in
system.
*** Can be reached only if PV and battery power is sufficient.Detail compatibility for backup
under off-grid scenario can be referred to the user manual.
**** Peak power only for Resistive loads. Detail refer to SHRT backup output power
document.
Parameters SH8.0RT SH10RT
PV Input
Recommended max. PV in-
put power
12000 W 15000 W
Max. PV input voltage
1000 V
Startup voltage
250 V
Rated input voltage
600 V
MPP voltage range
200 V - 950 V
11 Appendix User Manual

Table of Contents

Other manuals for Sungrow SH10RT

Related product manuals