152
Parameters SH8.0RT-20 SH10RT-20
Operating ambient tempera-
ture range
-25 ℃ - 60 ℃
Allowable relative humidity
range (Non-condensing)
0 - 100 %
Cooling method Natural convection
Max. operating altitude 4000 m
Noise (Typical) 30 dB(A)
Display LED
Communication
RS485, WLAN, Ethernet, CAN, 4 × DI, 1 × DO
DC connection type MC4 (PV) / Evo2 Compatible (Battery)
AC connection type Plug and play connector
Country of manufacture China
Mechanical Data
Dimensions (W x H x D) 460 mm x 540 mm x 170 mm
Mounting method Wall-mounting bracket
Weight 27 kg
Backup Data
Rated voltage 3 / N / PE, 220 Vac / 230 Vac / 240 Vac
Frequency range 50 Hz / 60 Hz
Total hamonic factor output
voltage(Linear load)
2%
Switch time to emergency
mode
< 20 ms
Rated output power
8000 W / 8000 VA
10000 W / 10000 VA
9999 W / 9999 VA for
Australia
Peak output power ***
12000 W / 12000 VA，5min
12000 W / 12000 VA,5min
Peak output power on single
phase ****
2700 VA (≥12.8kWh) 3400 VA (≥12.8kWh)
Rated output current for
backup load during on grid
mode
3 x 18.5 A
* Depending on the connected battery.
** Germany is available for 2 inverters parallel in maximum if no ripple control is used in
system.
*** Can be reached only if PV and battery power is sufficient.Detail compatibility for backup
under off-grid scenario can be referred to the user manual.
11 Appendix User Manual
To Next Page
Loading...
