48
Device Operation
M
odifying User Information
Use the following steps to modify the information of a registered user.
1
Go to Menu > User > Edit User.
2
Select a user by pressing the user name field.
Precautions for Registration
• If there is no progress in registration, slightly move your face.
• It is recommended to register your face at the installation site.
• Register an expressionless face.
• It is recommended to keep a distance of 40~80cm from the device when registering your face.
• If a user wears glasses, you may replace step 4 "Move your face left and right" with "take off your glasses
and stare directly at the screen".
• Remove any obstacles obstructing your face. The eyes and eyebrows must be exposed.
• Only one person can use the device at a time.
• Do not wear sunglasses when using the device.
• Re-enroll users that have undergone major changes in facial appearance.
• Multiple versions of an individual's face are extremely useful for individuals wearing glasses or
individuals with beards.
• Individuals wearing glasses can enroll their face with and without glasses.
• Individual with beards can progressively enroll various stages of a beard cycle. Once the beard cycle has
been completed, the individual will not have to register again.
Note
• If you press Menu while no user is registered, the administrator's menu is displayed without any
authentication process.
• When a general user follows the process to enter the administrator's menu, the user can view the
event log for the time and attendance.
• Regardless of a previously set authentication mode, you can move to the administrator's menu by
Face authentication, Card authentication, and ID + Face/Pin authentication.
To Next Page
Loading...
