6-2 POWER UNIT
INTAKE MANIFOLD ASSY
REMOVAL
Before removing the intake manifold assy:
• Remove the fuel pressure in line. (See the page 5-2.)
• Disconnect the battery cables from the battery.
• Remove the flywheel cover.
• Remove both side covers. (See the page 7-2.)
1. Remove the breather hose 2 and the evaporation hose 3
from the silencer cover 1.
2. Remove the bolt, the cover band and the silencer cover.
3. Disconnect the fuel hoses from the low pressure fuel pump.
4. Remove the two bolts and the high pressure fuel filter.
5. Disconnect the fuel hose from the delivery pipe.
6. Disconnect the wire from the fuel injectors.
7. Remove the two bolts.
8. Remove the delivery pipe 1 with the fuel injectors.
To Next Page
