2-18 PERIODIC MAINTENANCE
ANODES AND BONDING WIRES
Inspect every 50 hours (3 months).
ANODES
If 2/3 of the anode has corroded away, replace the anode.
#
Never paint the anode.
NOTE:
The anode securing bolt should be covered with the Suzuki Sili-
cone Seal.
& 99000-31120: Suzuki Silicone Seal
BONDING WIRES
If breakage or other damage is found, replace the wire.
If rust or corrosion is found on the wire terminal, clean it with
solvent.
Anode
To Next Page
