Suzuki DL650K5 - Page 110

3-56 ENGINE
& Conrod I.D.
& Crank pin O.D.
" 09900-20202: Micrometer (25 – 50 mm)
& Bearing thickness
#

A Color code
CONROD AND BEARING REASSEMBLY
• When fitting the bearings to the bearing cap and conrod, be
sure to fix the stopper part

A first and press in the other end.
#
• Apply MOLYBDENUM OIL SOLUTION to the crank pin and
bearing surface.
* MOLYBDENUM OIL SOLUTION
Code I.D. specification
1
41.000 – 41.008 mm
(1.6142 – 1.6145 in)
2
41.008 – 41.016 mm
(1.6145 – 1.6148 in)
Code O.D. specification
1
37.992 – 38.000 mm
(1.4957 – 1.4961 in)
2
37.984 – 37.992 mm
(1.4954 – 1.4957 in)
3
37.976 – 37.984 mm
(1.4951 – 1.4954 in)
Color (Part No.) Thickness
Green
(12164 – 46E01-0A0)
1.480 – 1.484 mm
(0.0583 – 0.0584 in)
Black
(12164 – 46E01-0B0)
1.484 – 1.488 mm
(0.0584 – 0.0586 in)
Brown
(12164 – 46E01-0C0)
1.488 – 1.492 mm
(0.0586 – 0.0587 in)
Yellow
(12164 – 46E01-0D0)
1.492 – 1.496 mm
(0.0587 – 0.0589 in)
The bearings must be replaced as a set.
Be sure to clean the conrod big end.
PartShark.com
877-999-5686