3-62 ENGINE
& Bearing thickness
#
A Color code
REPLACEMENT
Use the special tool to replace the crankshaft journal bearings.
The replacement procedure is as follows.
• Set the special tool as shown to remove the crankshaft journal
bearings with the special tool.
" 09913-60221: Journal bearing remover/installer
NOTE:
Remove the crankshaft journal bearings in only one direction,
from inside to outside of each crankcase half.
Color (Part No.) Thickness
Green
(12229 – 27G00-0A0)
1.996 – 1.999 mm
(0.0786 – 0.0787 in)
Black
(12229 – 27G00-0B0)
1.999 – 2.002 mm
(0.0787 – 0.0788 in)
Brown
(12229 – 27G00-0C0)
2.002 – 2.005 mm
(0.0788 – 0.0789 in)
Bearing must be replaced as a set.
PartShark.com
877-999-5686
To Next Page
Loading...
