ENGINE 3-65
• Apply enough engine oil to the special tool and the bearings
and then set the special tool carefully.
• Gradually press
1 in the bearing
2 into the main journal bore
by using the hand-press until the special tool
3 contacts the
special tool
4.
NOTE:
Using the hand-press is recommended to install the crankshaft
journal bearings. However, the crankshaft journal bearings can
be installed by using the following special tools.
" 09924-84510: Bearing installer set
09910-20116: Conrod holder
09913-60221: Journal bearing remover/installer
• After installing the bearings, check the bearing surface for any
scratch or damage.
PartShark.com
877-999-5686
To Next Page
Loading...
