CHASSIS 7-43
• Install the rear sprocket mounting drum assembly to the rear
wheel hub.
• Tighten the sprocket mounting nuts to the specified torque.
! Rear sprocket nut: 60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Install the collar.
REAR AXLE
• Remount the rear wheel and rear axle, install the washer and
rear axle nut.
• Adjust the chain slack after rear wheel installation. ("2-21)
• Tighten the rear axle nut to the specified torque.
! Rear axle nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
• Install the new cotter pin. (For E-03, 28, 33)
PartShark.com
877-999-5686
To Next Page
Loading...
