*1
Triangle mark of each spark plug cap
must be brought to the exhaust side.
*4 Do not slack the lead wire.
*2 Cut the tip of clamp after clamping. *5
Pass through the PAIR reed valve wire between the
frame and PAIR control solenoid valve.
*3 Clamp the high-tension cord. *6
Pass through the licence lamp wire in front of the seat
lock cable.
Clamp
*1
Clamp
*2
#1
Ignition
coil
ABS brake hose
(DL650A only)
Reserver
inlet
hose
FrameFrame
*6
Taping clamp
Clamp
EXEX IN
IN
*4
*5
*3
*2
ICES label
(E-28 only)
#2 Ignition coil
Magneto
lead wire
DL650K7/AK7 (’07-MODEL) 13-129
PartShark.com
877-999-5686
To Next Page
Loading...
