ENGINE 3-17
• Install the clutch cable to the generator cover temporarily.
• Apply SUZUKI MOLY PASTE to the clutch release.
( 99000-25140: SUZUKI MOLY PASTE
\
• Assemble the clutch release so that the lever arm
A will be
angle of 80 degree with axle
B.
• Adjust the clutch cable play. (!2-17)
NOTE:
After installing the clutch release, make sure that there is clear-
ance between the clutch cable end and the driveshaft end.
PartShark.com
877-999-5686
To Next Page
Loading...
