Suzuki LT-Z250 - REAR DRIVE DISASSEMBLY

4-4 DRIVE TRAIN
 Remove the rear axle together with the axle housing.
 Remove the O-ring
4.
REAR DRIVE DISASSEMBLY
FINAL GEAR CASE
 Remove the final gear case cover bolts diagonally and evenly.
 Pry the cover at the arrows as shown by tapping with a plastic
mallet.
 Remove the ring gear and shims.
 Remove the dust seal with the special tool.
" 09913-50121: Oil seal remover
NOTE:
If there is no abnormal condition, the dust seal removal is not
necessary.
#
The removed dust seal must be replaced with a new
one.
PartShark.com
877-999-5686