7-36 CHASSIS
REMOVAL
Remove the front fender. (! 7-6)
Remove the master cylinder assembly
1 from the handle-
bars. (!7-26)
Remove the throttle lever case
2.
Disconnect the rear brake cable
3 and remove the handlebar
switch
4.
Disconnect the fuel vent hose and remove the steering head
cover
5.
Disconnect the indicator lights
6 from the steering head
cover.
Remove the clamps
7.
Remove the handlebars
8.
Remove the cotter pins, tie rod end nuts and washers.
$
Replace the removed cotter pins with new ones.
PartShark.com
877-999-5686
To Next Page
Loading...
