Suzuki LT-Z250 - Spark Arrester

2-12 PERIODIC MAINTENANCE
 Place an oil pan under the final gear case, and then drain oil
by removing the drain plug
2 and filler plug 3.
 Tighten the drain plug
2.
 Remove the oil level check plug
4 and pour the specified oil
through the filler hole until the oil over flows from the oil level
check hole.
 Tighten the filler plug
3 and the oil level check plug 4.
% Final gear oil capacity:
190 ml (6.42 US oz, 6.69 lmp oz)
# Final gear oil drain plug: 26 N•m (2.6 kgf-m, 19.0 lb-ft)
Final gear oil filler plug: 26 N•m (2.6 kgf-m, 19.0 lb-ft)
SPARK ARRESTER
 Remove the spark arrester bolt
1.
 Extract the spark arrester
2 from the muffler.
 Clean the spark arrester
2 with a brush.
'
 Reinstall the spark arrester
2.
 Tighten the spark arrester bolt to the specified torque.
# Spark arrester bolt: 11 N•m (1.1 kgf-m, 8.0 lb-ft)
Clean every 6 months.
Only clean the spark arrester in an open area away
from combustible materials. Exhausted hot carbon
particles can start a fire.
PartShark.com
877-999-5686