Suzuki LT-Z250 - ENGINE REMOVAL AND INSTALLATION

ENGINE 3-3
ENGINE REMOVAL AND INSTALLATION
ENGINE REMOVAL
Before taking the engine out of the frame, wash the engine
using a steam cleaner. Engine removal is sequentially explained
in the following steps. Reinstall the engine by reversing the
removal procedure.
 Drain engine oil. (!2-10)
 Remove the seat. (!7-5)
 Disconnect the
- battery lead wire 1.
 Remove the left and right side covers
2. (!7-5)
 Remove the left and right footrest mud guards
3. (!7-7)
 Remove the fuel tank center cover and front fender
4.
(!7-6)
PartShark.com
877-999-5686