Suzuki LT-Z250 - Reassembly and Remounting

CHASSIS 7-33
REASSEMBLY AND REMOUNTING
Reassemble and remount the front suspension in the reverse
order of removal and disassembly. Pay attention to the following
points:
 Degrease the tapered portions of the knuckle, knuckle end
and tie rod end with nonflammable cleaning solvent.
 Install the wishbone arms to the knuckle.
 Install the washers and tighten the knuckle nuts to the speci-
fied torque.
" Knuckle nut: 29 N•m (2.9 kgf-m, 21.0 lb-ft)
 Install new cotter pins.
$
 Install the front shock absorber
1.
Replace the removed cotter pins with new ones.
PartShark.com
877-999-5686