CHASSIS 7-61
REMOVAL
Remove the rear wheels. (!7-11)
Remove the rear wheel hubs. (! 7-11)
Remove the rear brake. (!7-46)
Remove the rear axle housing/final gear case bolts 1 and
rea
r axle housing set bolts/nuts 2.
Rem
ove the rear axle housing 3 and rear axle 4.
Rem
ove the O-ring 5.
INSPECTION
REAR AXLE SHAFT
Inspect the rear axle shaft visually for distortion or damages. If
any damages are found, replace the rear axle shaft with a new
one.
Using a dial gauge, check the axle shaft for runout and replace it
if the runout exceeds the limit.
" 09900-20607: Dial gauge (1/100 mm)
09900-20701: Magnetic stand
09900-21304: V-block set (100 mm)
# Axle shaft runout
Service Limit: 3.0 mm (0.12 in)
PartShark.com
877-999-5686
To Next Page
Loading...
