8-22 ELECTRICAL SYSTEM
LAMPS
HEADLIGHT
!
HEADLIGHT BULB REPLACEMENT
Disconnect the coupler.
Remove the bulb.
Install new bulb in the reverse order of removal.
HEADLIGHT BEAM ADJUSTMENT
Adjust the headlight vertical beam by loosening the screw 1.
If y
ou touch the bulb with your bare hands, clean the bulb with a cloth moistened with alcohol
or soapy water to prevent premature bulb failure.
Head light: 12 V 40/40 W
E-28 ONLY
7.8 N•m (0.78 kgf-m, 5.6 lb-ft)
1.8 N•m
(0.18 kgf-m, 1.3 lb-ft)
PartShark.com
877-999-5686
To Next Page
Loading...
