ENGINE 3-47
CRANKCASE
BEARING INSPECTION
Rotate the bearing inner race by finger to inspect for abnormal
play, noise and smooth rotation while the bearings are in the
crankcase.
Replace the bearing in the following procedure if there is any-
thing unusual.
BEARING REMOVAL
Remove the bearing retainers.
Remove the bearings with the special tools.
Use proper bars for the drive bevel gear bearing removal.
& 09921-20240: Bearing remover set
09923-74510: Bearing remover
09930-30104: Sliding shaft
'
Play
Play
The removed bearings should be replaced with new
ones.
PartShark.com
877-999-5686
To Next Page
Loading...
