CHASSIS 7-53
REAR SHOCK ABSORBER
CONSTRUCTION
REMOVAL
Raise the rear wheel off the ground and support the vehicle
with a jack or wooden block.
Remove the rear shock absorber
1.
INSPECTION
REAR SHOCK ABSORBER
Inspect the rear shock absorber body and rubber bushing for
damage and leakage of oil.
If any defects are found, replace the rear shock absorber with a
new one.
$
78 N•m (7.8 kgf-m, 55 lb-ft)
60 N•m (6.0 kgf-m, 43.0 lb-ft)
Do not attempt to disassemble the rear shock
absorber and to bleed out the nitorogen gas. It is
unserviceble.
PartShark.com
877-999-5686
To Next Page
Loading...
