Suzuki LT-Z250 - Reassembly and Remounting

CHASSIS 7-49
 Remove the bearing with the special tool.
% 09921-20240: Bearing remover set
$
REASSEMBLY AND REMOUNTING
 Install new bearing with the special tool.
% 09913-70210: Bearing installer set
 Install the snap ring.
 Install new dust seal
2 to the drum cover 3 by using the
removed dust seal
1.
 Apply SUZUKI SILICONE GREASE to the dust seal lips.
* 99000-25100: SUZUKI SILICONE GREASE
The removed bearing must be replaced with a new
one.
Drum cover
Dust seal
PartShark.com
877-999-5686