Suzuki LT-Z250 - Page 212

7-50 CHASSIS
 Apply SUZUKI SUPER GREASE to new O-rings and brake
camshaft.
 Install the O-rings and brake camshaft to the anchor panel.
& 99000-25030: SUZUKI SUPER GREASE  A (USA)
99000-25010: SUZUKI SUPER GREASE  A (Others)
$
 Install the washer
4.
 Install the spring
5 with the spring end hocked to the hole on
the brake panel.
 Align the protrusion
A of the brake lining indicator prate 6
with the groove
B of the brake camshaft.
 Install the brake lining indicator prate
6.
 Install the brake cam lever
7 as its punched mark C aligns
with the slit
D on the brake camshaft.
 Tighten the cam lever nut to the specified torque.
" Cam lever nut: 11 N•m (1.1 kgf-m, 8.0 lb-ft)
 Install new O-ring
8 onto the rear brake panel.
$
O-rings should be replaced with new ones.
O-ring must be replaced with a new one.
PartShark.com
877-999-5686