7-42 CHASSIS
Install the steering head cover with the projection
A inserting
into the cushion
B on the steering head cover bracket.
NOTE:
The indicator light position on the steering head cover is shown
on page 8-24.
Install the handle switch with the lug
5 on the switch half
inserted into the hole
6 on the handlebars.
NOTE:
After installing the handlebars, make sure that the cable, wiring
harness and brake hose routing are properly. (!9-12 to -14)
Install the steering head cover.
PartShark.com
877-999-5686
To Next Page
Loading...
