10-10 LT-Z250K5 (05-MODEL)
TIGHTENING TORQUE
CHASSIS
FRONT BRAKE CALIPER MOUNTING BOLT
Apply THREAD LOCK SUPER 1360 to the caliper mounting bolts before tightening them.
99000-32130: THREAD LOCK SUPER 1360
ITEM N•m kgf-m lb-ft
Handlebar clamp bolt 23 2.3 16.5
Steering shaft holder bolt 23 2.3 16.5
Steering shaft nut 49 4.9 35.5
Wishbone arm pivot bolt/nut (upper and lower) 65 6.5 47.0
Wheel hub nut (front) 65 6.5 47.0
Wheel hub nut (rear) 138 13.8 99.9
Wheel set nut (front and rear)
* 60 * 6.0 * 43.5
Steering knuckle nut (upper and lower) 29 2.9 21.0
Front shock absorber mounting bolt/nut (upper and
lower)
60 6.0 43.5
Tie rod end nut 29 2.9 21.0
Tie rod lock nut 29 2.9 21.0
Front brake air bleeder valve 6.0 0.6 4.4
Front brake caliper mounting bolt 26 2.6 19.0
Front brake pipe nut (Upper and lower) 16 1.6 11.6
Front brake pad mounting pin 18 1.8 13.0
Front brake caliper holder pin 18 1.8 13.0
Front brake caliper holder slide pin 23 2.3 16.5
Front brake master cylinder mounting bolt 10 1.0 7.0
Front brake hose union bolt 23 2.3 16.5
Front brake disc bolt 23 2.3 16.5
Front brake disc plate mounting bolt 23 2.3 16.5
Footrest bolt (M8) 26 2.6 19.0
Footrest bolt (M10) 55 5.5 40.0
Rear shock absorber mounting bolt/nut (Upper) 78 7.8 55.0
Rear shock absorber mounting bolt/nut (Lower) 60 6.0 43.5
Swingarm pivot bolt/nut 85 8.5 61.5
Rear brake cam lever bolt/nut 11 1.1 8.0
Rear brake pedal mounting bolt 11 1.0 8.0
Rear brake panel mounting nut 60 6.0 43.5
PartShark.com
877-999-5686
To Next Page
Loading...
