4-4 FUEL SYSTEM
REMOUNTING
Remount the fuel tank and fuel valve in the reverse order of
removal. Pay attention to the following points:
• Tighten the fuel valve bolts to the specified torque.
Fuel valve bolt: 4.5 N·m (0.45 kgf-m, 3.3 lb-ft)
NOTE:
Install the rounded side A of fuel hose to the fuel valve.
• Install the fuel tank.
NOTE:
Fuel tank breather hose 1 routing. (7-17)
The removed O-ring and gaskets must be replaced
with new ones.
PartShark.com
877-999-5686
To Next Page
Loading...
