5-12 CHASSIS
• Remove the brake plate 0.
• Remove the axle spacer A.
INSPECTION AND DISASSEMBLY
BRAKE DRUM/WHEEL HUB
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit.
The value of this limit is indicated inside the brake drum.
09900-20101: Vernier calipers
Brake drum I.D.:
Service Limit: 80.7 mm (3.18 in)
BRAKE SHOE
Inspect the brake shoes for wear or damage. If they are worn or
damaged, replace it with new ones.
FRONT BRAKE DUST SEAL
Inspect the front brake dust seal for wear or damage. If any
defects are found, replace it with a new one.
NOTE:
Apply adhesive all around of the new dust seal, and attach it to
the brake plate.
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
PartShark.com
877-999-5686
To Next Page
Loading...
