ELECTRICAL SYSTEM 6-15
OIL SEAL INSPECTION
Check the oil seal lip for damage or leakage.
If any defects are found, replace the housing end assembly.
BUSHING
Inspect the bushing for wear or damage.
If any wear or damage is found, replace the starter motor with a
new one.
STARTER MOTOR REASSEMBLY
Reassemble the starter motor in the reverse order of disassem-
bly. Pay attention to the following points:
• Apply SUZUKI SUPER GREASE “A” to the lip of the oil seal.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Apply a small quantity of SUZUKI MOLY PASTE to the arma-
ture shaft.
99000-25140: SUZUKI MOLY PASTE or equivalent
• Apply SUZUKI SUPER GREASE “A” to the O-ring.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
PartShark.com
877-999-5686
To Next Page
Loading...
