4-6 FUEL SYSTEM
SPECIFICATIONS
I.D. NO. LOCATION
• The carburetor has I.D. Number A stamped on its body
according to its specifications.
ITEM SPECIFICATION
Carburetor type MIKUNI VM13
Bore size 13 mm
I.D. No 43G0
Idle r/min. 2 000 ± 150 r/min.
Float height 23.4 ± 1.0 mm (0.92 ± 0.04 in)
Main jet (M.J.) #58.8
Jet needle (J.N.) 3N39-1st
Needle jet (N.J.) E-6
Pilot jet (P.J.) #12.5
Air screw (A.S.) PRE-SET
Throttle cable play 3 – 5 mm (0.12 – 0.20 in)
PartShark.com
877-999-5686