CHASSIS 5-31
• Remove the rear brake cam lever bolt and cam lever.
• Remove the rear brake camshaft 0, brake lining indicator
plate A, spring B and O-rings C.
• Remove the rear axle housing.
INSPECTION AND DISASSEMBLY
BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit. The value of this limit is
indicated inside the brake drum.
09900-20101:Vernier calipers
Brake drum I.D.:
Service Limit: 110.7 mm (4.36 in)
PartShark.com
877-999-5686
To Next Page
Loading...
