ENGINE 3-15
ENGINE COMPONENTS INSPECTION
AND SERVICING
CYLINDER HEAD
DISASSEMBLY
• Remove the intake pipe 1 and insulator 2.
• Pull out the rocker arm shaft 3.
• Remove the intake rocker arm 4 and exhaust rocker arm 5.
• Push the spring retainer 6 by the finger and move it side-
ways.
• Remove the spring retainer 6 from the groove of the valve
stem.
• Remove the valve spring 7.
• Pull out the intake valve 8 and exhaust valve 9.
PartShark.com
877-999-5686