PERIODIC MAINTENANCE 2-3
MAINTENANCE AND TUNE-UP PROCEDURES
This section describes the servicing procedures for each item of
the periodic maintenance requirements.
Before performing the servicing procedures mentioned in the
periodic maintenance chart, remove following parts to ease ser-
vicing work;
•Seat. (5-4)
• Front frame cover. (5-4)
• Left frame cover. (5-4)
• Right frame cover. (5-4)
• Frame center cover. (5-5)
• Maintenance lid. (5-6)
• Front grip. (5-6)
AIR CLEANER
If the air cleaner is clogged with dust, intake resistance will be
increase, resulting in a decrease in engine output and an
increase in fuel consumption. Clean the air cleaner element in
the following manner.
• Remove the seat. (5-4)
• Remove the battery holder. (5-5)
• Remove the air cleaner box cap 1.
• When installing the air cleaner box cap 1, face the “UP” mark
to the top.
• Remove the air cleaner element 2.
Clean every 3 months.
UP
PartShark.com
877-999-5686