CHASSIS 5-7
FRONT AND REAR WHEELS
CONSTRUCTION
REMOVAL
• Place the vehicle on level ground.
• Support the vehicle with a jack or wooden block and remove
the front and rear wheel set nuts.
• Remove the front and rear wheels.
REMOUNTING
Remount the wheels in the reverse order of removal. Pay atten-
tion to the following points:
• Installing each wheel, make sure the arrow A on the tire
points in the direction of rotation.
• Tighten the wheel set nuts to the specified torque.
Front and rear wheel set nut:
28 N·m (2.8 kgf-m, 20.0 lb-ft)
1 Front tire 4 Rear wheel
2 Front wheel A Wheel set nut (front & rear) ITEM N·m kgf-m lb-ft
3 Rear tire A 28 2.8 20.0
PartShark.com
877-999-5686